IMALENT MS12 CREE 12*XHP70 53000lm CW/ NW Search Light

Features

• Utilizes 12 pieces of American CREE XHP 70 LEDs, with a lifespan of up to 50000 hours and a maximum output of 53000 lumens.
• Built-in safety self testing intelligent charging circuit, convenient, fast and safe.
• Eight levels which can be exchanged quickly and instant Turbo.
• Six battery capacity indicators around the flashlight head, shows the capacity any Time.
• Size: 258mm (length)x 129.5 mm (head diameter) x 55.5mm (body diameter)
• Net weight: 1740g (battery included)
• High efficiency constant current circuit will maintain constant brightness
• Built-in thermal control module will automatically adjust the brightness output,keep using comfortably.
• Combination of toughened ultra-clear mineral and anti-reflective coating glass
• Aluminum OP reflector
• Aerospace-grade aluminum alloy body, wear-resistant Type III hard-anodized surface treatment
• IPX-8 standard waterproof (2 meters submersible)

Specifications

Other Details:

1. Switch ON/OFF
Press the power switch button one time to turn on and one more time to off the
flashlight.

2. Normal Lighting Mode
When the flashlight is on, press and hold the power switch button, it will cycle
from 300lm-900lm-1900lm-3800lm-7500lm-15000lm-30000lm,release the power
switch button will save the needed output level.

3.Turbo and Strobe
Double press the power switch button at any mode, will activate turbo output,
which is up to 53000 lumens, double press the power switch button again will
activate strobe, slightly press the power switch button to exit.

4. Side lights mode
With the flashlight off, press and hold the switch button for one second to turn on the side lights. With the side lights on, slightly press the button to change output levels, high-medium-low. Press and hold it for one second again to quit side lights mode.

5. Low battery warning
With the flashlight on, when the battery voltage is lower than 11.8V, the red indicator
will turn on. When the battery voltage is lower than 11V,the red indicator will flash
constantly to remind users to replace the battery or charge it.

6. Intelligent thermal control
While using the high output mode, the flashlight will generate a lot of heat. When
The flashlight body internal temperature reaches 55 degrees Celsius, it will
automatically reduce the brightness to 15000lm in order to ensure safe,
comfortable use and prevent discomfort from overheating.

7. Memory function
The flashlight will remember the brightness that it was previously set at. When you turn the flashlight on again, it remembers how bright it was before being turned off. (Special modes without memory)

8. Lock and unlock
With the flashlight off, press the switch button 3 times, the red indicator will flash
twice to indicate the flashlight is locked. Press the switch button 3 times again, the
green indicator will flash twice to indicate it unlocked, and can work normally.

9. Built-in Cooling Fan
1.) When the MS12 is in high output mode, the cooling fan automatically turns on
once the flashlights body reaches 55 degrees C.
2.) With the flashlight off, quickly press the switch button 4 times to activate the
cooling fan in order to cool off the flashlight.
3.) When under 15,000 lumens of output, the cooling fan will not turn on.

10. Charging
The product comes with intelligent charging function. Plug in one of the adapters as the picture shows into an electrical outlet(24V/2A),and plug in the other adapter into the indoor socket. It will take about 4 hours 38 mins to fully charge

As shown in Picture 1, the contact points of the positive and negative poles of the flashlight body are all in the same plane, and the plane must not be inverted on the conductor, otherwise the circuit board will be short-circuited.